High Capacity Water Distiller model DS1M
Suitable for use with the PyraMed range of Colloidal Silver Generators.
- Automatic High-Level Control
- Convenient Tap with Water Level Gauge
- 15 Litre (approximately 4 Gallons) Stainless Steel Storage Tank
- 316 Alloy stainless steel evaporator
- Incoloy (stainless steel) heating element – 1500 watt
- Volatile gas vent system eliminates VOCs prior to condensation
- Self-Sterilization Feature. With empty reserve tank, simply flip fan switch off for a couple of minutes when steaming
- Plugs into 230/240 volt outlet. (UK and Euro plugs and cords are included.)
- Fill manually. No water connection required.
- Automatically turns off when boiler requires filling. (Makes approx. 6 Litres per cycle.)
- Everything is included for a normal installation. (Installation kit, Post-filter and fittings.)
- Height: 33 cm
- Width: 51 cm
- Depth: 33 cm
- Shipping Weight: 16 kg
- Height: 16.5 cm
- Width: 58.5 cm
- Depth: 42 cm
- Shipping Weight: 6.35
Notes: Manual distillers require refilling by hand after every 6 Litres or so has been distilled. All Durastill distillers have float switches that automatically turn off the distiller when the boiler gets low. So it is ok to leave the system unattended while it is running. This manual distiller comes with an automatic reservoir tank which will turn the distiller off when the tank is full. Therefore this system is basically an automatic system except that it does not fill automatically.